United States
United Kingdom
France
Sweden
Italia
Polska
Español
Hungary
Australia
GermanyPatented, Responsive Technology
Proven Performance
A Seamless Addition
Commercial Grade Durability
This technology means that AeraMax Professional works hard when it needs to, and shifts to standby when possible, saving energy and extending filter lifespan.
There are two sensing modes:
• Normal Mode: automatically adjusts between all fan speeds to control air quality (ideal for most shared spaces)
• Quiet Mode: uses quieter fan speeds when the space is occupied and all fan speeds when space is unoccupied (ideal where noise could be a concern)
Two high grade laser particle counters monitor air quality as it enters and exits the machine, enabling the screen to show the air quality data in two different display modes:
• Room Status: shows the current air quality in the room and the % of particles being captured in real-time.
• PM2.5: Displays real time the PM2.5 levels entering the unit and being removed in the filtration process.
The screen also showcases VOC/Odor levels and filter change reminders.
The AeraMax Professional four-stage filtration process uses the following proven methods to effectively clean the air
The pre-filter captures large particles and contaminants and helps protect the lifespan of other filters
Active Carbon filtration adsorbs odors and VOCs from the air
The True HEPA filter captures and traps 99.97% of airborne particles* Anti-microbial treatment on the HEPA filter effectively reduces the development of bacteria and fungi on the filter
The PlasmaTrue™ Bipolar Ionizer improves the capture efficiency of the particulate filter
The AeraMax Professional was designed to seamlessly integrate into your facility’s environment. All models are wall-mountable, unobtrusive and aesthetically pleasing, so you can provide worry-free air purification wherever it’s needed most.
All AeraMax Professional units are built with 24/7/365 operation in mind. That means continual use…and that means they’re constructed with superior components, high-grade filters and reinforced housings.
A well-engineered machine is quickly let down if using poor filters. Our True HEPA filters conform to IEST 1.5 HEPA Standard which proves 99.97% at the 0.3 micron size. In addition, our filters can capture more than 97.8% of pollutants at 0.1-0.15 microns, based on IBR Laboratories test data.
HEPA filters do not work like a sieve. The reality is that HEPA filters can capture ALL particle sizes. Due to the physics of how HEPA filters work (diffusion, interception and impaction), there is often an insignificant drop in filtration efficiency close to 0.3 micron. Filtration efficiency continues at a high % well below this particle size.
AeraMax Professional was independently tested and shown to remove 99.99% of airborne influenza flu virus within 20-35 minutes of operation
The Experts AgreeCDC: “Consider using portable high-efficiency particulate air (HEPA) fan/ filtration systems to help enhance air cleaning (especially in higher risk areas).”
Source
ASHRAE: “Add portable room air cleaners with HEPA or high-MERV filters with due consideration to the clean air delivery rate”
Source
A Computational Fluid Dynamics study demonstrates how AeraMax Professional systems improve air quality by diluting and removing airborne contaminants.
Contaminant Cloud Without System
Assumes all six toilets flushing all at once, constantly and stall doors closed
Contaminant Cloud With System Over Stalls
Significant decrease in concentration of contaminant at 2.5 PPM (red)
Increase in pure air in area directly in front of stalls
To achieve this with HVAC would require 250% flow rate increase
During our CFD simulation testing we observed significant full room filtration efficiency when wall mounted.
Solution can be installed closer to the source concern
Creates whole-room circulation and increases clean air distribution (less obstacles in air path)
Contaminated air is pulled closer to head height (breathing level) and not from the floor
Improves efficiency of ACH performance
Simply put, ACH is the amount of times we can move the volume of air in a room through our machine. An ACH of 5 means your air is being cleaned every 12 minutes! You should be aiming for 3-5 air changes per hour.
